Remote Sensing & GIS

Digital Image Processing: An Introduction

2009-04-05T23:28:00.001+05:30

Digital Image Processing (DIP) is a technique which involves manipulation of digital image to extract information. When satellite images are being manipulated in such manner, this technique is also referred to as satellite image processing.

It involves combination of software-based image processing tools. The whole process of Digital Image Processing can be classified into three parts-

Digital Image Pre-Processing

The raw satellite images may contain variety of errors in their geometry and radiometry (cosmetic appearance). Hence it is important to rectify these images before starting their interpretation. This typically involves the initial processing of raw satellite image for correcting geometric distortions, radiometric corrections & calibration and noise removal from the data. This process is also referred as Image Rectification. Image pre-processing is done before enhancement, manipulation, interpretation and classification of satellite images hence it is called so.

Digital Image Enhancement

Before starting visually interpreting satellite images, some image enhancement techniques are applied to manipulate theme to improve and enhance features. This helps in better interpretation of the images and in segregating one feature type to the other. Image enhancement involves use of a number of statistical and image manipulation functions provided in image processing software. These include contrast enhancement, histogram equalization, density slicing, spatial filtering, image ratio (like RVI, NDVI, TVI etc.), principal components analysis (PCA), colour transformations, image fusion, image stacking eic.

Digital Image classification

It is software–based image classification technique which involves automated information extraction and subsequent classification of multispectral satellite images. These are statistical decision rules which groups pixels in different feature classes. Digital classification techniques are less time consuming than visual techniques. Digital satellite images can be classified digitally using supervised, unsupervised or hybrid type of image classification (these will be discussed in detail in a separate chapter).

-------------------------------------------------------------

Please see INDEX for complete list of topics

------------------------------------------------------------------

Things to Remember while Starting GPS Survey

2009-04-05T23:17:00.002+05:30

Before leaving for field work always check whether your GPS instrument is working properly.

If there are waypoints and tracks are stored in the GPS instrument during previous survey then it is advisable to download them on your computer system and then erase them from the GPS. In this manner you will have maximum space available to store waypoints etc. for the new survey.

Always carry user manual and technical help guides of your GPS instrument with you.

Always ensure to carry an extra pair fully charged rechargeable batteries (and of course don’t forget to carry battery charger!).

Please do not start survey immediately after switching on the instrument. Wait till the GPS starts displaying x & y positions and positional accuracy in stable manner (i.e. till these values stops fluctuating rigorously).

Always check the page which displays signal strength and number of satellites available.

During GPS survey avoid recording points below trees, high rise buildings and other obstructions as they weakens the signal strength hence decrease the accuracy. Some times such obstructions in may break the signals completely.

If you are recording waypoints/tracks while navigating in a vehicle it is advisable to use external antenna connected to your GPS (rather than carrying the instrument in your hand and keeping it outside the window of the vehicle which is not only dangerous but tiring also).

At the end of the day always ensure for availability of sufficient space in the instrument for the storing waypoints/tracks for the next days’ survey.

Although most of GPS instruments are rugged, try to avoid any kind of mishandling and carelessness.

-------------------------------------------------------------
Please see INDEX for complete list of topics
------------------------------------------------------------------

Selecting Right GPS

2009-04-03T00:32:00.006+05:30

Selection of GPS is solely depends on user requirement and of course, availability of funds. There are numerous models of GPS available in market and there prices vary according to functions, features and accuracy of measurement.

Most of the basic handheld GPS provides facility to store limited number of waypoints (for example a Garmin60 handheld GPS can store up to 512 waypoints), tracks and routes. Most of these instruments display information like vehicle speed, distance traveled, positions of satellites, quality of satellite signals, direction of North, coordinates (x,y and z) and time. Apart from all these features, one must also ensure following important things before purchasing a GPS instrument-

User-friendly- A good GPS instruments should be user-friendly so that anybody should be able to operate, at least its basic functions, with ease. For example- One should be able to record a waypoint just by 2-3 clicks of keys.

Interface- As now a days USB is almost become universally used interface, one should ensure that the GPS instrument must have provisions for both COM port and USB connectivity.

Ruggedness- GPS is completely field-based outdoor instrument and it is widely-used in variety of field condition like tough terrains, various climatic conditions (extreme summers, winters, rains etc.) and dust. One should always ensure that it should be rugged enough to operate properly in such conditions.

Accuracy- Most of the handheld GPS provides positional accuracy in the range of 5-15 m. The cost of instrument increases with the enhancement in the accuracy.

Troubleshooting & Technical Assistance- Before purchasing GPS instrument of a particular brand one must ensure that technical executives of that GPS company are available and accessible with ease to you so that, incase, the instrument doesn’t work properly one can contact them immediately to save valuable time on field.

-------------------------------------------------------------

Please see INDEX for complete list of topics

------------------------------------------------------------------

Books on Remote Sensing & GIS

2007-06-24T01:33:00.000+05:30

There are many books available on remote sensing and GIS. Here is brief introduction of some of these books which are useful for learning and understanding basics of remote sensing and GIS.

Title: Remote Sensing and Image Interpretation
By
T.M. Lillesand and R.W. Kiefer
John Wiley & Sons, Inc., New York

A must have. One of the best books on Remote Sensing highly recommended for beginners. Good reference material for experts also. All the aspects of remote sensing and image interpretation are discussed in details with all fundamental concepts.

Title: Remote Sensing of the Environment: An Earth Resource Perspective
By
John R Jensen
Pearson Education, Inc.

This book contains thirteen chapters. Basic principals of remote sensing for environment are discussed in depth. There are separate chapters for visual image interpretation, aerial photography and photogrammetry.

Title: Introduction to Remote Sensing
By
James B. Cambell
Taylor & Francis

Another good book on remote sensing fundamentals and basics.

Title: Introductory Digital Image Processing: A Remote Sensing Perspective
By
John R Jensen
Prentice Hall, New Jersey

Another good work from John R. Jensen. This book is a must for learning image processing of digital satellite images.

Title: Principles of Geographical Information System for Land Resource Assessment
By
P.A. Burrough
Oxford University Press

This is a fundamental book for understanding basic concepts of GIS.

Title: Geographical Information System
Volume I: Principal and Technical Issues
Volume II: Management Issues and Applications
Edited by
P.A. Longley, M.F. Goodchild, D.J. Manguire, D.W. Rhino
John Wiley & Sons

These two volumes contain chapters on principles, management and applications of GIS. A number of experts contributed in these to discuss and unfold various aspects of GIS and its applications in detail.

Title: The GIS Book
By
George B Korte
On Word Press, Thomson Learning, Inc.

What this book offers to you is written on its cover page itself- “How to implement, manage and assess the value of Geographical Information System".

-------------------------------------------------------
Please see INDEX for complete list of topics.
----------------------------------------------------------------

GPS: An Introduction

2007-06-09T13:57:00.000+05:30

Global Positioning System (GPS) is satellite-based navigation system which records and displays location of an object on earth (in terms of coordinates, e.g. latitude and longitude). It also shows height of a place above mean sea level.

Like many other remote sensing and GIS devices, application of GPS devices was also first started for military and defense purposes. Slowly these devices made entry into public domain for various civilian uses. Now GPS has become so popular that it is being integrated in new generation mobile phones.

A GPS device receives signals from satellites and these signal codes are processed & converted into values showing position, time and velocity (what we see on screen of GPS device). The instrument to which we generally call ‘GPS’ is basically a GPS receiver and it is a small part of a large system. A complete Global Positioning System consists of three segments- space segment, control segment and user segment.

Space Segment

Space segment consists of dedicated satellites for Global Positioning System and are referred as space vehicles (SVs). There are twenty four satellites in a nominal GPS constellation. Out of these twenty four satellites three are spare satellites which start operating if some of the functional twenty one satellites have some operational problem.

These satellites remain in six orbital planes (four in each) and are positioned such that five to eight of these SVs visible from any place on the earth at a given point of time.

Control Segment

The control segment consists of tracking stations located around all over world. There are master control station and monitoring stations in control segment.

User Segment

User segment of GPS is what we uses i.e. GPS receiver. It also includes the GPS user community. A GPS receiver consists of a screen for displaying information, buttons to operate it and antenna to receive signals from satellites. The antenna may be in-built in receiver instrument or it may be externally attached to it.

Signals from minimum four satellites are required for a GPS receiver to compute location (x, y & z) and time (t). GPS receivers are essential part of navigation system of air crafts and ships. Now-a-days these are also being integrated in surface-based navigation (trains, buses, cars & other vehicles).

----------------------------------------------------
Please see INDEX for complete list of topics
------------------------------------------------------

Digitization: Basics and Right Methods

2007-06-06T00:13:00.001+05:30

Process of digitization involves creation of vector layers using digitizing tools. It is a method of converting raster data into vector data.

In this process a satellite image covering area of interest or raster map containing desired features is used as background and features are traced over it with the help of digitizing tools available in the GIS software. Separate vector layers are created for different features for example- roads, rivers, railways, water bodies, land use, wells, etc.

Things to remember

1. First georegister (or georeference) the satellite image (if it is raw) or raster map then start digitization over it. Vector layers created in this way will automatically pick projection from raster layer in background. If you digitize features over raw images (i.e. without projection) then you will need to georeference each and every vector layer which will consume a lot of time and resources.

2. Define snapping tolerance before starting digitization so that arcs will be properly connected and dangles will not be created.

3. If you are digitizing polygons, do not re-digitize common boundary between them. Use specialized tool provided in the software- using which you will need only to digitize boundary which is not shared by adjacent polygons, the common boundary it will take automatically.

4. It is always better to attach attributes simultaneously while digitizing, it will save lot of time and chances of attaching wrong attributes will be negligible.

5. Tolerances should be defined very carefully large tolerance values may remove legitimate lines and polygons while very small values may not remove all topological errors (dangles and slivers).

6. Digitization requires a lot of patience and hard work. If done in hurry it may degrade the quality of desired output. Use of improperly digitized vector layers in subsequent analysis and modeling may lead to erroneous results.

Digitization Errors

Dangles

Dangles are topological errors where an arc or a line does not end at the point where it should. These are created due to improper digitization. Dangles are of two types- overshoots and undershoots.

1. Overshoots

When an arc or a line does not end at its termination point on another arc and goes beyond it is called as overshoot.

2. Undershoots

When an arc or a line finishes before connecting to another arc on desired location it is called as undershoot.

Spurious Polygons

Spurious polygons or slivers are often created during overlay of two or more polygon layers. Slivers are small polygons which results due to overlay operations of polygons whose edges do not match.

Avoiding/removing Dangles and spurious polygons

Dangles can be avoided it proper snapping tolerance is defines before starting digitization. Even then if dangles are created then these can be removed during ‘cleaning’ of vector layers- at that time also desired tolerance should be set and cleaning is done which automatically removes dangles.

Spurious polygons can be removed during cleaning operation by setting proper tolerance values.

-------------------------------------------------------
Please see INDEX for complete list of topics.
----------------------------------------------------------------

Georegistration: Basics & Right Methods

2007-05-31T23:13:00.000+05:30

Georegistration is the process of registering and transforming a raw map or raw satellite image in order to assign it real-world coordinates. When we scan a map, it is not referenced with the earth and when we open such scanned map in GIS software whatever coordinates it displays, those are coordinates of computer screen not that of real-world. Hence we need to assign proper coordinates to it and transform it into a georegistered (or georeferenced) map having real-world projection system.

A raw map can be georegistered in two ways-

1. If the hard copy map contains coordinate information in it (mostly written as latitude/longitude on the border of map at regular intervals), then this map can be georeferenced using its own coordinates. After scanning such map we import it in GIS software and assign same coordinates on the same places as marked on it.

2. If we don’t have a map as discussed above then we have to georeference it using another map which is already georeferenced. In such cases we have to identify same features in both maps and need to take control points on both them one by one. After taking sufficient points we georeference the raw map.

Control points are those features which are identifiable on raw map/image and on corresponding georeferenced map/image (as well as on ground).

Avoiding Errors in Georegistration

After scanning a hard copy map and importing it into GIS software, we need to georegister it. Generally it is considered as the first step to begin a GIS task (unless you already have georeferenced maps or images). Georegistration is important process as positional (or geographical) accuracy of features to be shown in subsequent maps depend on it. Most of the times errors come when control points are less, inaccurate and not homogenously distributed throughout the scanned map (or satellite image).

One should be very careful while marking control points if there is any confusion in identifying features on raw map and georeferenced image then one should always confirm the right location. If it remains doubtful then its better not to mark any control point. Even a single wrongly marked control point could create significant positional error.

Apart from selecting accurate control points, selection of right polynomial equation for transformation (or resampling) the raw map/image is also important. One should always experiment- which order of polynomial can give desired results. Generally it is said that higher the polynomial order higher accurate will be georegistration but sometimes using higher order may skew or stretch your map too much and the map got deformed (it mostly happens when there is less number of control points on one portion of map while more on others). So one have to apply one’s own judgment that which order is best. Suppose you have taken 12 control points for georegistration, now you have options for using polynomial order 1, 2 or 3. It is suggested that one should use all the three options and observe the result to decide the suitable one.

-------------------------------------------------------
Please see INDEX for complete list of topics.
----------------------------------------------------------------

GIS SOFTWARE-2: MANIFOLD

2007-05-27T01:37:00.000+05:30

Manifold is low cost software which provides most of the functionalities required in GIS. It is very user friendly software and runs on MS Windows. This software is not very popular but users are growing day-by-day and it still has very little market share in comparison to ArcGIS.

Manifold contains all basic GIS tools and functionalities like- digitization, geocoding, georeferencing, attribute table management, spatial analysis, map navigation, layout preparation, basic image processing etc. Some of the notable features are:

It can import vector data, raster data and satellite images from almost all format of data used in GIS.

Its extraordinary selection capabilities provide it an edge over many other software. Features selected in one layer can be used to select features in other layers. For example- We can use a selected boundary polygon to select same geographical area in a satellite image through transfer selection tool.

It contains tools for surface analysis and terrain modeling. Streams and watersheds can be created through digital elevation models.

Projection Transformations in Manifold are excellent. One can easily change projection of layers from one to another without much pain. However it may take longer time for raster data.

Google Earth lovers will definitely enjoy this software as it provides a variety of GE related tools.

Transform toolbar is another good and easy-to-use feature. It has a number of options for vector and raster data analysis.

Manifold contains in-built internet map server (IMS) for publishing GIS maps on web.

The main concern with this software is its format i.e. *.map. It can not be imported in any software directly, user has to export its vector or raster layers in standard GIS format using Manifold itself. Suppose If somebody gives me GIS data in Manifold’s *.map format and if I have ArcGIS (but not Manifold) than I can’t do anything with it as it can not be imported (unlike shape files or MapInfo files which can be imported/opened in most of the GIS software).

But still it is good software and provides GIS facilities much more than one can expect in small price. Detailed information about this software can be seen on its website.

-------------------------------------------------------
Please see INDEX for complete list of topics.
----------------------------------------------------------------

GIS SOFTWARE-1:ESRI

2007-05-26T15:20:00.000+05:30

There is large number of GIS software available in market and being used by GIS users across the world. The choice for procuring particular GIS software depends on kind of GIS tasks to be done and the budget available. Here we will be discussing two software- ArcGIS and Manifold. While ArcGIS is very advanced and popular software Manifold is low cost (still very handy & useful) GIS solution. There is no bias for these or any other GIS software. This article is for reference purpose only and views are personal.

ESRI GIS SOFTWARE

ESRI’s (Environmental Systems Research Institute) GIS product popularly known as ArcGIS desktop is one of the most widely used GIS software. One can hardly find any GIS expert who hasn’t work on ArcGIS. Also one can’t hardly find any GIS software which does not import or export files in *.shp format (i.e. ESRI’s shape file format for vector data).

ArcGIS desktop is a general term which is used for ESRI’s three products- ArcView GIS, ArcEditor and ArcInfo. All of these three have same interface, the difference is in their functionalities and tools (obviously so in the price!!).

ArcView GIS

This ESRI product has basic GIS functionalities like digitization, editing, georeferencing, exploring, browsing, queries, attribute table editing, map navigation, labeling, raster support, layout creation, projection transformation, basic spatial analysis, utility network analysis etc.

ArcEditor

ArcEditor contains all the features of ArcView plus many other advance features like raster editing, vectorization, multiuser database editing, coverage data management, geodatabase administration, geodatabase topology management, advance utility network analysis, cartographic tools etc.

ArcInfo

This ESRI product is considered as complete GIS solutions. It contains all the features of ArcEditor and some more advanced tools like – advance label management, advance cartographic tools, advance data manipulation (coverage geoprocessing) etc.

No doubt that ESRI’s products are great and very popular but these are very expansive hence individuals even can’t dream to purchase. Even it’s basic feature software ArcView is beyond one’s pocket. This is one of the reasons why ArcGIS is mostly used by big organizations (small organizations dare to purchase these only if their client agrees to fund it!).

Except financial aspect the ArcGIS is nice software. More advanced features are being updated regularly. One can find number free scripts from ESRI support site for arc scripts. There are number of free advance tools available on internet (like- KML export support for viewing vector data in Google Earth) which can easily be installed on computer system and can be used in ArcGIS. As so much support available online one can do decent GIS even with ArcView.

Detailed information about ArcGIS desktop functionalities and applications are available on ESRI’s website.

---------------------------------------------
Please see INDEX for complete list of topics.
-------------------------------------------------

HUMAN RESOURCES IN GIS

2007-05-20T14:41:00.000+05:30

Please keep visiting for updates.
Contact us on sudursamvedan@gmail.com for suggestions.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

~~~

People in GIS are one of the five essential components. Success of a GIS assignment largely depends upon the human resources involved in it. A good, skilled, motivated and mutually cooperating team produces excellent results. Like other fields, in GIS also there is a chain of tasks interlinked with each other; any weak link may lead to hampering the whole assignment.

GIS Manager

A GIS manager is the most important personnel in GIS team. Here the term GIS manager is used in broader perspective (it covers GIS team leader also). His responsibilities are to conceptualize, manage and effectively implement GIS in a project. A good GIS manager always explores the possibilities of applying GIS in relevant projects for saving time, better presentation and effective solutions. He should have skills & experience (at least 5-7 years) in variety of GIS tasks and good management skills. A GIS manager should always motivate and “push” the team to finish tasks in time with quality. He should be able to conceptualize the whole GIS task with precise methodology and should also have back up plans, in case if one fails can immediately implement the other. Most of the time GIS-based tasks in a project are critical ones as the team has to bring out good output from bad quality and deficient data, hence GIS manager should have clear picture of the whole assignment and should implement right methods (considering time constraint!).

GIS Specialist

A GIS specialist (or GIS engineer) should have basic as well as advance skills in GIS. He should have at least three years of experience in various applications of GIS (like- transportation, water resource, disaster management, urban planning etc.). He should possess problem defining and solving abilities. A GIS specialist is expected to support GIS manager in defining methodology and helping in its proper implementation. Possessing knowledge of basics of computer programming and database always advantageous for GIS specialist (and for organization too).

GIS Programmer

GIS programmers are now-a-days high in demand. They customize GIS software and develop need-specific GIS modules with in given constraints (time & budget). They should have sound knowledge of computer programming (Visual Basic, C++ and JAVA are most frequently used in GIS development) and should be able to understand GIS problems (hence basic GIS knowledge is required). Experienced GIS programmers are often expected play role of database managers/administrators; hence they should have expertise in database management (in popular database software like- Oracle, MySQL etc.).

GIS Support Staff

GIS support staff performs GIS-related tasks at basic level which includes data collection, field survey, map scanning, data entry, digitization, georeferencing, map printing etc. GIS support staff should have basic knowledge of GIS. It is very important for GIS managers and specialists to convey the support staff that how important there inputs are and doing mistakes at their level may lead to disasters at higher level (while doing analysis and modeling). The actual of GIS begins at this level hence support staff should avoid as much errors as possible in their tasks.

---------------------------------------------------------
Please see INDEX for complete list of topics.
------------------------------------------------------------------

Vector Data Vs. Raster Data

2007-05-17T23:25:00.000+05:30

~Please keep visiting for updates~
~~Contact us on sudursamvedan@gmail.com for suggestions~~~

Vector Data

Represented by point, line and polygon.
Relatively small file size (small data volume)
Excellent representation of networks.
A large no. of attributes can be attached, hence more information intensive and a number of thematic maps can be prepared from a single layer.
Features are more detailed & accurate.
Creating, cleaning and updating data is more time and labour consuming.
Topology-based analysis & operations are easier to perform (like network analysis etc.).
Can not represent continuous values like land use, elevation etc very well.
Assigning projection and transformations are less time taking and consumes less memory of the computer system.
Topology makes data structure complex.

Raster Data

Points, line & polygons everything in the form of Pixels.
Large file size.
Networks are not so well represented.
Only one pixel value represents each grid cell.
Generalization of features (like boundaries) hence accuracy may decrease.
Simulations and modeling is easier (spatial analysis, terrain modeling etc.).
Maintaining is easier.
Excellent for representing data containing continuous values (like land use, elevation etc.)
Coordinate-system transformations take more time and consume a lot of memory.
Grid cells or pixel makes simpler data structure.

-----------------------------------------------------
Please see INDEX for complete list of topics
-----------------------------------------------------------

TYPES OF GIS DATA

2007-05-13T18:44:00.001+05:30

GIS data can be broadly described as- Spatial data and Non-spatial data.

SPATIAL DATA

Spatial data is geographical representation of features. In other words, spatial data is what we actually see in the form of maps (containing real-world features) on a computer screen. Spatial data can further be divided into two types- vector and raster data.

Vector Data

Vector data represents any geographical feature through point, line or polygon or combination of these.

1. Point

A point in GIS is represented by one pair of coordinates (x & y). It is considered as dimension-less object. Most of the times a point represent location of a feature (like cities, wells, villages etc.).

2. Line

A line or arc contains at least two pairs of coordinates (say- x1, y1 & x2, y2). In other words a line should connect minimum two points. Start and end points of a line are referred as nodes while points on curves are referred as vertices. Points at intersections are also called as nodes. Roads, railway tracks, streams etc. are generally represented by line.

3. Polygon

In simple terms, polygon is a closed line with area. It takes minimum three pairs of coordinates to represent an area or polygon. Extent of cities, forests, land use etc. is represented by polygon.

Raster Data

Raster data is made up of pixels. It is an array of grid cells with columns and rows. Each and every geographical feature is represented only through pixels in raster data. There is nothing like point, line or polygon. If it is a point, in raster data it will be a single pixel, a line will be represented as linear arrangement of pixels and an area or polygon will be represented by contiguous neighbouring pixels with similar values.

In raster data one pixel contain only one value (unlike vector data where a point, a line or a polygon may have number of values or attributes) that’s why only one geographical feature can be represented by a single set of pixels or grid cells. Hence a number of raster layers are required if multiple features are to be considered (For example- land use, soil type, forest density, topography etc.).

As discussed earlier digital satellite images are also in raster format.

NON-SPATIAL DATA

Attributes attached to spatial data are referred to as non-spatial data. Whatever spatial data we see in the form of a colourful map on a computer screen is a presentation of information which remains stored in the form attribute tables. Attributes of spatial data must contain unique identifier for each object. There may be other field also containing properties/information related a spatial feature. Attribute table of spatial data also contains ‘x’ and ‘y’ location (i.e. latitude/longitude or easting/northing) of features; however in some GIS software these columns may remain ‘invisible’.

For example- if we are doing demographic analysis of villages then attributes of each point (representing a village) must have a unique village ID and other demographic information like total population, number of males & females, number of children etc.

In another example- if we are doing some GIS analysis related to road then each road must have its unique Road ID. Other attributes may include like road length, road width, current traffic volume, number of stations etc.

-----------------------------------------------------

Please see INDEX for complete list of topics

------------------------------------------------------

Components of GIS

2007-05-08T00:39:00.000+05:30

There are five essential components which make a complete Geographic Information System. Even imagine about GIS is not possible if we remove one of these components. All components are important (however some may be more some may be less). These are-

Hardware
Software
Data
Method
People

Hardware

A robust computer system is must for smoothly performing all the operations required in GIS. We can divide hardware in two categories- essential and optional. The essential hardware includes Computer monitor, CPU, keyboard and mouse. This is the basic requirement to start working in GIS. Optional hardware includes- printer, plotter, scanner, projector etc. It is good to have optional hardware also but only if your budget permits, otherwise these can be outsourced. Apart from these one should have storage and data transfer devices also, like- CDs (for transferring & storing data which is small in volume), DVDs (for larger data sets), pen drive, external hard disk etc.

Software

GIS software provides commands, tools and functions for storing, capturing, processing, analyzing and displaying GIS data. There is lot of options available in market (like- ArcView/ ArcEditor/ ArcInfo by ESRI, MapInfo, GeoMedia, Manifold etc.). One should go for the GIS software which can provide complete solution. It may be costly at initial stage but is a good investment in long term. Good GIS software provides:

~Import & export options of industry standard formats like- ESRI shape files, MapInfo files, image files, database files, AutoCAD drawings, etc.(these are only few examples).

~Tools for digitization of points, lines and polygons. Auto-digitization option, if available, can be very useful sometime.

~Georeferencing and projection conversion tools.

~GPS support (to download & upload way points, tracks, maps etc.) for standard GPS instrument like that from- Garmin, Trimble, Leica, Magellan etc.

~Data Analysis tools for- spatial analysis, geostatistical analysis, 3-D analysis (terrain modeling), network analysis etc.

~Raster support with basic image processing tools.

~A number of layout and map preparation options.

~Support to display layouts & maps properly; and also to export these for further use in non-GIS platforms (like making presentation in Microsoft PowerPoint).

The above mentioned list may not be complete; it is just for giving a broad idea about GIS software (Some tools may be included or some may be excluded from this list).

Data

Data is the most important component of GIS. The final GIS output largely depend on the availability and quality of the data (If you want to cook a healthy and tasty food then good quality vegetables and grains should be available to you with a lot of varieties!). The input data for GIS may be in the form of- satellite images, scanned maps, survey data, historical records, topomaps, spreadsheets etc.

Methods

There are a lot of methods used in GIS. Which methodology is to follow is solely depends upon the kind of GIS assignment to be done. There are some generalize and standard methods used in GIS. However, it may be needed to develop and customize your own methods to get desired output. Whatever methods one uses, it is necessary to do planning for each and every step. A well-defined and carefully selected methodology (according to our requirements) always saves time, resources and money; and gives good results.

People

It is people for & by whom GIS is developed. There are lot of people who are directly or indirectly remain involved in it – GIS managers (to manage and plan whole GIS task), GIS specialist (to perform GIS related operations), surveyors, data collectors, database administrators (to maintain & manage GIS database), programmers (to customize GIS software), end users and decision makers.

------------------------------------------------

Please see INDEX for complete list of topics

------------------------------------------------

GIS: Introduction and Definition

2007-05-07T00:17:00.000+05:30

Geographic Information System (GIS) is becoming more & more popular among decision makers as it enables them to quickly refer the GIS outputs which help them in solving problems and making right decisions. Visualization of features, converting data into need-based maps (thematic maps) and capability of providing solutions by taking into account overall scenario of an area are some of the virtues of GIS due to which it is being implemented across a number of sectors and departments (e.g.,transportation, forestry, environment, disaster management, urban planning, health etc).
We often feel difficulty to understand and visualize a problem just by seeing data or figures. We are more comfortable with visual representation of a problem that’s what GIS is giving to us (that too with the true representation of real-world).

Definition

GIS is made up of three terms- Geographic, Information and System. In literal meaning Geographic Information System is a System containing Information which is geographic in nature.

GIS can be defined as - A System which involves collecting/capturing, storing, processing. manipulating, analyzing, managing, retrieving and displaying data (information) which is, essentially, referenced to the real-world or the earth (i.e. geographically referenced).

Explanation of the Definition

We have used many term in the definition of GIS mentioned above. It is necessary to discuss each term for getting an idea - what actually GIS is?

Collection/Capturing

The dataset collected for GIS may be in the form of hard copy maps, satellite images, survey data or other data obtained from other primary and secondary sources. Collection of data depends on the objective of the assignment. Data capturing involves digitization of hard copy maps and satellite images.

Storage

In GIS Storage means not merely storing whatever data we have collected. The collected data is converted in usable GIS format and then finally stored for further use either on computer hard disk or in other storage devices (CD, DVD, magnetic tapes etc.)

Processing and Manipulation

The collected and stored dataset is imported and converted into layers. Then required attributes are attached. Then data is processed for refinement, removing errors and preparing it for further GIS-based analysis. Data manipulation is essential so that it can be represented in proper understandable form.

Analysis

Analysis of GIS data is required to convert it into desired outputs. There are many type of analysis in GIS which is (or are) to be done is objective dependant. The analysis may be statistical, spatial or specialized (like network analysis, utility analysis etc. Need not to say GIS analysis requires skilled professionals.

Management

Data management is essential and very important part of GIS for storing, managing and properly maintaining GIS database.

Retrieval

In GIS, data can be retrieved through SQL or spatial queries. Some software provide tools to retrieve data by simply selecting the features. Retrieval is used for getting information about the features of our interest.

Display

Displaying of final output may in many forms. These may be hard copy printouts, on-screen display of maps, internet-based map display (through Internet Map Servers) or in the form of presentation (like power point).

INDEX

2007-05-02T00:35:00.006+05:30

REMOTE SENSING

~~~

(Please scroll down to see list of GIS & GPS related topics)

~~~

Fundamentals of Remote Sensing

About Satellite Images

Applications

Satellite Sensors

Miscellaneous

Digital Image Processing *NEW SECTION*

Digital Image Processing: An Introduction

GEOGRAPHIC INFORMATION SYSTEM (GIS)

Understanding GIS

Global Positioning System (GPS)

GPS: An Introduction
Selecting Right GPS *NEW*
Things to Remember while Starting GPS Survey *NEW*
More topics on GPS Coming soon

>Please keep visiting for updates.
>Write to sudursamvedan@gmail.com for your feedbacks.
>Please feel free to suggest topics of your interest.

‘Digitally’ ‘Reading’ a Satellite Image

2007-04-29T23:49:00.000+05:30

~~~
Please keep visiting for updates.
Contact us on sudursamvedan@gmail.com for feedbacks and suggestions.
Please feel free to suggest any topic related to RS/GIS we will try to include it.
~~~

Satellite images contain loads of information regarding the land area in their coverage. These are like mines having tons of metal but you have to explore, process and convert them into finished products to make them usable and to get desired information.

Information extraction from satellite images requires basic knowledge of image interpretation, skills in image processing and compatible software which can convert data into information. We have already discussed in detail regarding elements of visual image interpretation in the section Reading a Satellite Image.

With the advancement of technology digital image processing is also advanced a lot and is being practiced for information extraction from satellite images very effectively. What we often skip in visual image interpretation due to limitation of our eyes can be bring out using digital image processing methods.

In digital image processing number of algorithms are used to process satellite images. These algorithms digitally manipulate the raw images and convert them into desired information. These are mostly used to emphasize and extract features of our interests. For example- vegetation indices are applied for deriving valuable information regarding vegetation.

Digital image processing, in simple word, is playing with the digital numbers (DN) of pixels. But we have to be master of this play if we want to get desirable results. It is as easy and as difficult as playing with simple numbers. Image processing techniques are based on our day-to-day addition, subtraction, multiplication and division operators. A good knowledge of statistics is also required because in many of image processing techniques statistics is very frequently applied. For example- Principal Component Analysis (PCA) of satellite images is statistics based process. PCA is widely used to extract useful information from multiple bands filtering noise from the data.

Vegetation Index

Vegetation indices are very frequently and commonly used for vegetation related studies. These indices are (mostly) based on 'ratioing' of infrared and red bands. This is because vegetation reflects a large number of EMRs in infrared regions while absorbs EMRs in red region.

Some of the vegetation indices are ratio vegetation index (RVI), normalized difference vegetation index (NDVI), transformed vegetation index (TVI) etc. NDVI is particularly helpful in analysis of vegetation health and vegetation cover density.

Principal Component Analysis (PCA)

PCA techniques are used to ‘compile’ information from a large number of bands to lesser number of bands. Suppose we have to extract information from five bands of Landsat ETM+ image. When we do PCA- it will analyze all the five bands and remove redundant information to provide output in the form of PCA images. The first PCA image will contain most of the information and the information content will keep on decreasing in second, third and subsequent images. In other words we can say PCA compresses multiple band information into one or two images. Need not to say this technique enhances variance in the satellite images.

Thermal Pollution & Remote Sensing

2007-04-29T14:35:00.000+05:30

~~~

Please keep visiting for updates.
Contact us on sudursamvedan@gmail.com for feedbacks and suggestions.

Feel free to suggest any topic related to RS & GIS we will try to include it.

~~~

Thermal water pollution is a potential hazard for aquatic life. Many industries (like thermal power stations) release hot water in their effluent directly to rivers or water bodies. This is also against environmental laws in many countries but detection is difficult because hot water doesn’t have different colour from cold water so our eyes can not recognize it. Secondly such illegal activities mostly practiced in night. So, how to detect it? Answer is- Thermal Remote Sensing.

Thermal pollution can easily detected by thermal remote sensing (or thermal imaging) devices. These operate in thermal infrared bands of EMR and are acquires data to produce night time images. Thermal imaging captures emissions of EMR from an object rather than reflections. When hot water released into a stream it emits thermal radiations which are sensed by thermal imaging devices. Hot water emits more thermal radiations than cold water that’s why it appears brighter & cold water appears darker. Hot water plumes become very clear & conspicuous in thermal images, we can detect the source of release and the extent of spread of hot water.

Urban Heat Detection

Urban areas behave as heat islands due to very high emission of thermal radiations. Their temperature remain higher than surrounding non-urban areas- basically due to high energy consumption, very large surface area covered by asphalt and concrete, lesser soil surfaces and low vegetation cover.

Energy is mostly consumed in the form of electricity and in the process large amount of heat is released. While concrete and asphalt surfaces (like buildings, roads, pavements etc.) absorb solar radiations and later release thermal emissions. Vehicular and industrial pollution in cities also contribute to heat emissions and so in increasing urban ambient temperature.

Thermal imaging devices help in detecting relative warmness/coolness of urban islands. High energy consumption areas and hot spots can be mapped using thermal remote sensing images. As we all know vegetation reduces ambient temperature significantly so thermal imaging can help in identifying urban areas where plantation is required to cool down the hot spots.

‘Reading’ a Satellite Image

2007-04-22T23:55:00.000+05:30

Please keep visiting for updates,soon more topics will be covered.
Please post your comments if you are looking for a particular topic on Remote Sensing, GIS & GPS we will try to include them.

~~~~~

Satellite images are like books. To read and interpret these, we need to learn the language in which these are written. The more we practice the more conversant we become in interpreting images. Experience is the key for digging more and more information. Visual image interpretation comes with time and with understanding of elements which help to ‘decode’ the language of images. These elements of visual image interpretation are as follows:

Shape

Size

Tone

Texture

Pattern

Shadow

Location

Association

Shape

Shape of ground objects and features is one of the most important elements to identify them. For example- Road and rail both appear like lines but road has sharp curves while railway track has smooth curves. Natural water bodies are with irregular shape while most of the man-made water bodies have definite shape (rectangular, circular etc.). Same is true for natural drainage and man-made canal.

Size

Sizes are important in identifying many objects, e.g. on the basis of size we can differentiate between trees and bushes. Length, width, height (i.e. dimensions) and area provide clue for many objects. We can interpret in terms of absolute and relative sizes. When we talk about absolute size of a feature we go for exact dimensions while in relative size we look in terms of smaller or bigger. In high resolution satellite image one can easily assume size of a building by comparing it with size of a car parked next to it.

Tone

It refers to reflectance of features which we see in the form of tone of colours in a satellite image. As we discussed earlier different objects appear different in an image depending upon their spectral signatures. Hence this element gives firm evidence in identification of many features. On the basis of tone we can differentiate between plant species, age of plants, shallow & deep water bodies, dry & wet soil, crop types etc.

Texture

Texture of ground feature refers to how tones vary in the image. In other terms, how frequently tone varies. Textures are often said to be coarse and fine/smooth e.g. young plants generally have smooth texture while mature ones appear coarse-textured. Crops have smoother texture than vegetation.
Scale or resolution of satellite image should be considered while interpretation is being done on the basis of texture because low resolution images will show most of the features smooth-textured and after certain scale we can not differentiate between objects only on it.

Pattern

Arrangement of objects also helps in image interpretation. Most of the man-made features show definite pattern hence these can easily be differentiated from natural objects. For example, plantations have definite arrangement of trees with well defined pattern while natural vegetation will not have uniform pattern.

Shadow

Shadows are both good and bad for image interpretation. These are good for studying relief and identifying hilly regions. Tall objects (like clock tower, overhead water tanks etc.) which are sometimes difficult to locate, can easily identified with the help of their shadows.
Shadows are bad because these mask most of the features coming in their zone. These particularly create problems in hilly terrain where hill shadows hide information about vegetation and many other features.

Location/site

Site of presence of an object helps in avoiding misinterpreting it as other same looking object. For example- tones of two vegetation species may appear similar in an image but their geographical location can help to identify them correctly.

Association

While interpreting an image we should always consider how a particular feature is associated with its surroundings. For example- one can identify a village by- its small number of settlements, connecting roads, agriculture land in its adjoining area and often a water body.

Whether we are experts or novice- in image interpretation we should always consider a number of elements before concluding about features. Only considering one element may lead to erroneous identification of objects.

Before Selecting a Satellite Image!!

2007-04-22T18:29:00.000+05:30

Choice of satellite imagery very much depends on purpose of the user, in other words what kind of information we want. There are certain things which always kept in mind while procuring a satellite image:

Time of the year
Cloud coverage
Spatial resolution
Spectral resolution
Financial constraints

Time of the Year

Time is very important factor to decide whether to pick a satellite image or not. For example, if you want to study deciduous vegetation one must not go for image that is acquire by the sensor in autumn. Or if you want to map water holes and have procured summer time imagery it will be disastrous.

One should not misunderstand that autumn-time images are useless; instead these are very useful if evergreen vegetation are to be studied and mapped. In fact these images are helpful in differentiating deciduous and evergreen vegetation type.

Cloud Cover

Cloud is also important factor as these may mask the ground features partially or completely. That’s why rainy season images are not preferred (until unless one wants to do some specific study for this season). If you are lucky you can get cloud-free image in rainy season too. Sometimes winter & summer time images may also contain clouds. So always see preview of images before procuring them and avoid images having more than 10% cloud coverage.

Clouds are the main constraint in various types of land use/land cover studies for North-East India and Andmans & Nicobar Islands as most of the time these areas remain covered with clouds.

Spatial & Spectral Resolution

These resolutions are important in the sense- what kind of study you want to do? If you want satellite images for cartographic purpose then high resolution panchromatic images are good (e.g., CARTOSAT-1 & 2 images, IKONOS panchromatic images etc.). On the other hand for forest mapping, multispectral images are required which may be low in spatial resolution like Landsat ETM+ Images or IRS-1D LISS III images. In some cases when built-up area & vegetation types are mapped to be togather- then multispectral images with high spatial resolutions are used (e.g. IRS-P6 MX LISS IV images).

Financial Constraints

If you have selected a cloud free satellite image for a right season with right resolution then you must see you pocket also- whether you have sufficient money or not. Going for high resolution images are definitely going to cost much higher. So where a Landsat ETM+ or IRS-1D images can work don’t go for IKONOS multispectral images. Also processed images cost high. If you have good image processing software and skilled team then don’t buy processed images- as processing you can do in your lab itself. If you can spend some extra pennies then procuring georeferenced images from your vendor (like NRSA, Space Imaging etc.) can be a good idea as it will save your time and also you get data with acceptable accuracy.

A note on Digital Satellite Images

2007-04-21T00:38:00.000+05:30

Satellite images are used in two forms – analogue and digital. Analogue images are popularly known as hard copy images.

Digital images are made up of tiny picture elements known as ‘pixels’. These images are like matrices which are divided into rows and columns. It is obvious from their name that digital images have something to do with digits (or number). In fact these images are numerical representation of the features observed by a remote sensing device. It means every pixel must have some number or value to represent itself. These values are called as pixel values or digital numbers (DN). Digital number of a pixel depends upon the reflectance of a feature recorded by a sensor. Not necessarily a pixel has reflectance of a single object; it may be aggregate of many features ‘falling’ in that pixel. Suppose we are interpreting a satellite image acquired by IRS-1D LISS III sensor. Its single pixel represents 23.5mx23.5m of ground area; within this area a pixel may contain composite reflectance of a road, some road side trees and a building close to it.

A pixel of a satellite image has spatial and spectral properties. The spatial property represents spatial resolution of a satellite sensor while spectral one the appearance of the objects in a image.

On the basis of spectral properties, satellite images are of two type- panchromatic and multispectral images.

In panchromatic images pixels appears in different shades of grey that’s why often these are referred to as black & white images. Panchromatic images have single spectral band covering almost whole visible range of electromagnetic spectrum, e.g. CARTOSAT-1 images. The number grey shades which can be displayed by a pixel depend on number of bits per pixel. One bit images will have only two grey levels while 8-bit will have 256 grey levels.

Multispectral images contain multiple layer of spectral bands and are displayed in combination of red (R), green (G) and blue (B) colours. Hence these are coloured images e.g. IRS-P6 LISS IV MX images.

CARTOSAT: A Milestone achieved by India

2007-04-17T00:30:00.000+05:30

Please keep visiting for updates, this web page is being updated regularly, soon more topics will be covered.
Please post your comments if you are looking for any specific topic related to Remote Sensing, GIS & GPS we will try to include them on this web page.

~~~~~~~~~~~~~~~~~~~

CARTOSAT is the one of the most advanced remote sensing systems launched by Indian Space Research Organization (ISRO) so far. In the history of remote sensing it is a milestone achieved by India.

The main purpose of this mission is to provide large-scale high resolution satellite imagery which can efficiently be used for cartographic purposes. These are particularly very useful for urban planners in urban mapping and planning. Till date two satellites are launched in CARTOSAT series- CARTOSAT-1 and CARTOSAT-2.

CARTOSAT-1

It is the first in the CARTOSAT series and was launched in May 2005 by satellite launch vehicle PSLV-C6. It operates in panchromatic mode (black & white) in the EMR’s range of 0.50 micron to 0.85 micron. It carries two cameras to generate stereoscopic images. It provides spatial resolution of 2.5mx2.5m and radiometric resolution of 10-bit. Its revisit period is of 5 days.

The stereoscopic capability of CARTOSAT-1 gives it edge over many other remote sensing systems internationally. We can generate Digital Elevation Models (DEMs) and 3-D maps using its stereo-images. Apart from cartographic applications CARTOSAT-1 images are useful in resource management, pre & post disaster planning & management.

CARTOSAT-2

The second satellite of CARTOSAT series was launched in January 2007. It also operates in panchromatic mode with a spectral band of 0.50-0.85 micron. It is a very high resolution sensor system with less than one meter spatial resolution. Its revisit period is of 4-days.It will be highly useful for urban, rural planning and in cadastral level studies. It has already started acquiring images successfully. ISRO recently released some sample images acquired by CARTOSAT-2.

Popular Remote Sensing Systems

2007-04-15T18:49:00.000+05:30

Please keep visiting for updates, this web page is being updated regularly, soon more topics will be covered.
Please post your comments if you are looking for any specific topic related to Remote Sensing, GIS & GPS we will try to include them on this web page.
~~~

LANDSAT

Landsat satellite sensors are one of the most popular remote sensing systems, the imagery acquired from these are widely used across the globe.
NASA’s Landsat satellite programme was started in 1972. It was formerly known as ERTS (Earth Resource Technology Satellite) programme. The first satellite in the Landsat series Landsat-1 (formerly ERTS-1) was launched on July 23, 1972 .Since then five different types of sensors have been included in various combinations in Landsat mission from Landsat-1 through Landsat-7. These sensors are Return Beam Vidicon (RBV), the Multispectral Scanner (MSS), the Thematic Mapper (TM), the Enhanced Thematic Mapper (ETM) and the Enhanced Thematic Mapper plus (ETM+). Landsat ETM (or Landsat 6) was launched in 1993 but it could not achieve the orbit. Six year later in 1999 Landsat ETM+ (or Landsat 7) was launched and it is the recent one in the series.
Landsat ETM+ contains four bands in Near Infrared-visible (NIR-VIS) region with 30mx30m spatial resolution, two bands in Short Wave Infrared (SWIR) region with same resolution, one in Thermal Infrared (TIR) region with spatial resolution of 60mx60m and one panchromatic band with resolution. Its revisit period is 16 days.

SPOT

SPOT (Systeme Pour l’Observation de la Terre) was developed by the French Centre National d’ Etuded Spatiales with Belgium and Sweden. The first satellite of SPOT mission, SPOT-1 was launched in 1986. It was followed by SPOT-2 (in 1990), SPOT-3 (in 1993), SPOT-4 (in 1998) and SPOT-5 (in 2002).
There are two imaging systems in SPOT-5- HRVIR and Vegetation. The HRVIR records data in three bands in VIS-NIR region with 10mx10m spatial resolution, one band in SWIR region with 20mx20m spatial resolution and one panchromatic band with 5mx5m resolution. The Vegetation instrument is primarily designed for vegetation monitoring and related studies. It acquires images in three bands in VIS-NIR region and in one band in SWIR region (all with 1000mx1000m) spatial resolution.

Advanced Very High Resolution Radiometer (AVHRR)

Several generations of satellites have been flown in the NOAA-AVHRR series. NOAA-15 is the recent in the series. The sensor AVHRR (Advanced Very High Resolution radiometer) contains five spectral channels two in VIS-NIR region and three in TIR. One thermal band is of the wavelength range 3.55-3.93 mm, meant for fire detection. Spatial resolution of AVHRR is 1100mx1100m. NOAA-AVHRR mainly serves for global vegetation mapping, monitoring land cover changes and agriculture related studies with daily coverage.

Indian Remote Sensing (IRS) Satellites

The Indian Remote Sensing programme began with the launch of IRS-1A in 1988. After that IRS-1B (1999), IRS-1C (1995) and IRS-1D (1997) was launched. IRS-1D carries three sensors: LISS III with three bands of 23.5mx23.5m spatial resolution in VIS-NIR range and one band in SWIR region with 70.5x70.5 m resolution, a panchromatic sensor, with 5.8mx5.8m resolution and a Wide Field Sensor (WiFs) with 188mx188m resolution. WiFS is extensively used for vegetation related studies.

ISRO’s IRS-P6 (RESOURCESAT-1) is very advanced remote sensing system. It was launched in 2003. It carries high resolution LISS IV camera (three spectral bands in VIS-NIR region) with spectral resolution of 5.8mx5.8m which has capability to provide stereoscopic imagery. IRS-P6 LISS III camera acquires images in VIS-NIR (3 spectral bands) and SWIR (one spectral band) with spatial resolution of 23.5mx23.5m. IRS-P6 AWiFS (Advanced Wide Field Sensor) operates in VIS-NIR (3 spectral bands) and SWIR (one spectral band) with spatial resolution of 56mx56m.

Chronology of Remote Sensing

2007-04-14T12:48:00.000+05:30

Please keep visiting for updates, this web page is being updated regularly, soon more topics will be covered.
Please post your comments if you are looking for any specific topic related to Remote Sensing, GIS & GPS we will try to include them on this web page.

~~~

1800: Discovery of Infrared by Sir William Herschel.

1826: First photographic Image taken by Joseph Nicephore Niepce.

1839: Beginning of practice of Photography.

1855: Additive Colour Theory postulated by James Clerk Maxwell.

1858: First Aerial Photograph from a balloon, taken by G. F. Tournachon.

1873: Theory of Electromagnetic Energy developed by J. C. Maxwell.

1903: Airplane invented by Wright brothers.

1909: Photography from airplanes.

1910s: Aerial Photo Reconnaissance: World War I.

1920s: Civilian use of aerial photography and Photogrammetry.

1934: American society of Photogrammetry founded.

1935: Radar invention by Robert Watson-Watt.

1939-45: Advances in Photo Reconnaissance and applications of non-visible portion of EMR: World War II.

1942: Kodak patents first false colour infrared film.

1956: Colwell’s research on diseases detection with IR photography.

1960: Term “Remote Sensing” coined by Office of Naval Research personnel

1972: ERTS-1 launched (renamed Landsat-1).

1975: ERTS-2 launched (renamed Landsat-2).

1978: Landsat-3 launched.

1980s: Development of Hyperspectral sensors.

1982: Landsat-4 TM & MSS launched.

1984: Landsat-5 TM launched.

1986: SPOT-1 launched.

1995: IRS 1C launched.

1999: Landsat-7 ETM+ launched.

1999: IKONOS launched.

1999: NASA’s Terra EOS launched.

2002: ENVISAT launched.

2003: ISRO's RESOURCESAT-1 (IRS P6) launched.

2005: ISRO's CARTOSAT-1 launched.

2007: ISRO's CARTOSAT-2 launched.

Understanding Hyperspectral Remote Sensing

2007-04-13T22:20:00.000+05:30

Remote sensing techniques are changing very fast and undergoing a lot of advancements. Newer and advanced techniques are being introduced. Hyperspectral Remote Sensing is one of these techniques proving worth for various studies like environment, agriculture geology etc.

Hyperspectral remote sensing involves acquisition of the digital images in many, narrow, contiguous spectral bands throughout the visible, Near Infrared (NIR) , Mid-Infrared (MIR) and Thermal Infrared (TIR) regions of the electromagnetic spectrum.

Higher spectral resolution enables hyperspectral remote sensing instruments capable of detailed identification of material, geological features and vegetation at finer level, which is not possible with conventional multispectral remote sensors.

The multispectral satellite sensors contain less number of bands with broad spectral band width hence these are not capable of detecting fine details of the earth features being sensed. The broad band width cannot separate the objects having very little difference in their spectral reflectance. For instance if we talk about vegetation studies there are many plant species and vegetation classes, which possess almost similar spectral properties and hence these seem to fall in same class or seem to belong to same species. Such misinterpretation of the data leads to erroneous results thus creating limitations for multispectral sensors to work at micro level. Also, these sensors cannot detect very little changes in the moisture and chlorophyll content of the leaves.

On the other hand, Hyperspectral Imaging (HSI) instruments, possessing narrow large number of bands, make it possible to differentiate between the objects/features which may look similar in multispectral sensors. HSI can afford the detection of small alterations in the moisture content of the leaves, moisture status of soil, nutrient stress and other environmental stresses in the plants. The narrow bandwidth allows HSI to discriminate between the plant species and vegetation types having very small difference in the spectral reflectance.

Hyperspectral remote sensing is becoming popular among botanists, plant biochemists environmentalists, agriculturists and geologists. It is proving to be a good tool for studying plant physiology, canopy biochemistry, plant productivity, biomass, detecting health of the plants and for vegetation mapping.

This recent technique of remote sensing generates a large volume of data hence requires a lot of space to store it. Hyperspectral image processing is different from multipsectral one hence it requires special tools for processing and analysis.Also a lot of expertise and skills are needed for interpreting data acquired from HSI instruments correctly and for getting desired results.

Some of the Hyperspectral Remote Sensing systems are as follows:

Airborne Visible Infrared Imaging Spectrometer (AVIRIS)
AVIRIS acquires images in 224 spectral bands which are 9.6 nm wide. The range of these bands is in between 400nm to 2500 nm region of electromagnetic spectrum.

Compact Airborne Spectrographic Imager (CASI)
This imaging spectrometer collects data in 288 bands in the range between 400nm to 1000nm. The spectral interval of each band is 1.8nm.

Hyperspectral Mapping (HYMAP) System
It is an across-track hyperspectral imaging instrument. It collects data in 128 bands in the range of 400-2500nm.

Moderate Resolution Imaging Spectrometer (MODIS)
This hyperspectral imaging sensor is one of the sensors on TERRA satellite. It acquire data in 36 spectral bands and its spatial resolution ranges between 250m to 1 km (to be precise- Band 1 & 2 : 250m x 250m, Band 3 to 7 : 500m x 500m and Band 8 to 36 : 1km x 1km.)

Applications of Remote Sensing

2007-04-08T23:44:00.000+05:30

Forestry & Ecosystem

Forest cover & density mapping
Deforestation mapping
Forest fire mapping
Wetland mapping and monitoring
Biomass estimation
Species inventory

Agriculture

Crop type classification
Crop condition assessment
Crop yield estimation
Mapping of soil characteristic
Soil moisture estimation

Geology

Lithological mapping
Mineral exploration
Environmental geology
Sedimentation mapping and monitoring
Geo-hazard mapping
Glacier mapping

Hydrology

Watershed mapping & management
Flood delineation and mapping
Ground water targeting

Land Use/Land Cover mapping

Natural resource management
Wildlife protection
Encroachment

Urban Planning

Land parcel mapping
Infrastructure mapping
Land use change detection
Future urban expansion planning

Ocean applications

Storm forecasting
Water quality monitoring
Aquaculture inventory and monitoring
Navigation routing
Coastal vegetation mapping
Oil spill

Why Remote Sensing?

2007-04-07T00:35:00.000+05:30

Remote Sensing is unique in that it can be used to collect data, unlike other techniques, such as thematic cartography, geographic information systems, or statistics that must rely on data that are already available. Remote sensing data derived may then be transformed into information using analog or digital image processing techniques if appropriate logic and methods are used.

Remote sensing derived information is critical to the successful modeling and monitoring of numerous natural (e.g., watershed run off) and cultural processes (e.g., land use conversion at the urban fringe). In fact, for successful execution of many models- that rely on spatially distributed information- remote sensing is must.

The principal advantages of remote sensing are the speed at which data can be acquired from large areas of the earth’s surface, and the related fact that comparatively inaccessible areas may be investigated in this way.

The major advantages of this technique over ground-based methods are summmarized as follows:

Synoptic View

Remote sensing process facilitates the study of various earths’ surface features in their spatial relation to each other and helps to delineate the required features and phenomena.

Repitivity

The remote sensing satellites provide repetitive coverage of the earth and this temporal information is very useful for studying landscape dynamics, phenological variations of vegetation and change detection analysis.

Accessibility

Remote sensing process made it possible to gather information about the area when it is not possible to do ground survey like in mountainous areas and foreign areas.

Time Conservation

Since information about a large area can be gathered quickly, the techniques save time and efforts of human. It also saves the time of fieldwork.

Cost Effective

Remote sensing especially when conducted from space, is an intrinsically expensive activity. Nevertheless, cost-benefit analysis demonstrates its financial effectiveness, and much speculation or developmental remote sensing activity can be justified in this way. It is a cost-effective technique as again and again fieldwork is not required and also a large number of users can share and use the same data.

What is Remote Sensing?

2007-04-07T00:18:00.000+05:30

Remote sensing, in simplest words, means acquiring information about an object without touching the object itself.

Conventionally, however remote sensing has come to imply that the sensor and the target are located remotely apart and the electromagnetic radiation serves as a link between the sensor and the object, the sun being the major source of energy illuminating the earth. The part of this energy is reflected, absorbed and transmitted by the surface. A sensor records the reflected energy.

Remote Sensing is performed using an instrument, often referred to as a sensor. Most of the remote sensing instruments record electromagnetic radiation (EMR) that travels at a velocity of 3x10^8 m/s from the source, directly through the vacuum of space or indirectly by reflection or reradiation to the sensor. The EMR represents an extremely efficient high-speed communication link between the sensor and the remotely located objects.

A remote sensing sensor detects changes in the amount and the properties of EMR which become valuable source for interpreting various phenomena, objects etc.

Remote sensing can then be defined as-
The technique of acquiring information about an object by a recording device (sensor) that is not in physical contact with the object by measuring portion of reflected or emitted electromagnetic radiation from the earth’s surface.

Remote Sensing: Basic Principle

2007-04-07T00:10:00.000+05:30

The basic principle of remote sensing is that the different objects based on their structural, chemical and physical properties return (reflects or emits) different amount of energy in different wavelength ranges (commonly referred to as bands) of the electromagnetic spectrum incident upon it.

Most remote sensing systems utilize the sun’s energy, which is a predominant source of energy. These radiations travel through the atmosphere and are selectively scattered and/or absorbed depending upon the composition of the atmosphere and the wavelengths involved. These radiations upon reaching the earth’s surface interact with the target objects.

Everything in nature has its own unique pattern of reflected, emitted or absorbed radiation. A sensor is used to record reflected or emitted energy from the surface. This recorded energy is then transmitted to the users and then it is processed to form an image, which is then analyzed to extract information about the target.

Finally the information extracted is applied to assist in decision making for solving a particular problem.

An Overview

2007-04-07T00:06:00.000+05:30

There are many interrelated process, which are involved in acquisition of remotely sensed images, hence an isolated focus on any single component produces a fragmented picture. It is necessary to identify these components to have proper knowledge of remote sensing.

There four essential components of it:

The first component includes the physical features, like buildings, vegetation, soil, water and rocks. Knowledge of the physical features resides within such specific disciplines as geology, forestry, soil science, geography, and urban planning.

Sensor data are formed as a sensing device views the physical features by recording electromagnetic signals emitted or reflected from the landscape. The effective use of sensor of sensor data requires analysis and interpretation of to convert data into useful information.

These interpretations create extracted information, which consists of transformations of sensor data designed to reveal specific kinds of information. A more realistic view demonstrates that the same sensor data can be examined from alternative perspectives to yield different interpretations. Therefore a single can be interpreted to provide information about, for instance, vegetation, soils, rocks, water, depending on the specific data, information required and the purpose of the analysis.

The fourth component is the applications, in which the analyzed remote sensing data can be combined with other data to address a specific practical problem, such as land use planning, mineral exploration or vegetation mapping.

Stages in Remote Sensing

2007-04-07T00:05:00.000+05:30

The process of remote sensing involves a number of processes starting from energy emission from source to data analysis and information extraction. The stages of remote sensing are described in follows steps:

Source of Energy
The source of energy (electromagnetic radiations) is a prerequisite for the process of remote sensing. The energy sources may be indirect (e.g. the sun) or direct (e.g. radar). The indirect sources vary with time and location, while we have control over direct sources. These sources emit electromagnetic radiations (EMRs) in the wavelength regions, which can be sensed by the sensors.

Interaction of EMR with the Atmosphere
The EMR interacts with the atmosphere while traveling from the source to earth features and from earth features to the sensor. During this whole path the EMR changes its properties due to loss of energy and alteration in wavelength, which ultimately affects the sensing of the EMR by the sensor. This interaction often leads to atmospheric noise (it will be discussed in separate topic).

EMR Interaction with Earth Features
The incident EMR on the earth features interacts in various ways. It get reflected, absorbed, transmitted & emitted by the features and ground objects. The amount of EMR reflected, absorbed, transmitted and emitted depends upon the properties of the material in contact and EMR itself.

Detection of EMR by the remote sensing sensor
The remote sensing device records the EMR coming to the sensor after its interaction with the earth features. The kind of EMR which can be sensed by the device depends upon the amount of EMR and sensor’s capabilities.

Data Transmission and Processing
The EMR recorded by the remote sensing device is transmitted to earth receiving and data processing stations. Here the EMR are transformed into interpretable output- digital or analogue images.

Image Processing and Analysis
The digital satellite images are processed using specialized software meant for satellite image processing. The image processing and further analysis of satellite data leads to information extraction, which is required by the users.

Application
The extracted information is utilized to make decisions for solving particular problems. Thus remote sensing is a multi-disciplinary science, which includes a combination of various disciplines such as optics, photography, computer, electronics, telecommunication and satellite-launching etc.

Types of Remote Sensing

2007-04-06T23:57:00.000+05:30

Based on Source of energy
The sun provides a very convenient source of energy for remote sensing. The sun’s energy is either reflected, as it is for visible wavelength or absorbed and then re-emitted (for thermal infrared wavelength).

Remote sensing systems, which measure this naturally available energy, are called passive sensors. This can only take place when the sun is illuminating the earth. There is no reflected energy available from the sun at night. Energy that is naturally emitted can be detected day and night provided that the amount of energy is large enough to be recorded.

Remote sensing systems, which provide their own source of energy for illumination, are known as active sensors. These sensors have the advantage of obtaining data any time of day or season. Solar energy and radiant heat are examples of passive energy sources. Synthetic Aperture Radar (SAR) is an example of active sensor.

Based on Range of Electromagnetic Spectrum

Optical Remote Sensing
The optical remote sensing devices operate in the visible, near infrared, middle infrared and short wave infrared portion of the electromagnetic spectrum. These devices are sensitive to the wavelengths ranging from 300 nm to 3000 nm. Most of the remote sensors record the EMR in this range, e.g., bands of IRS P6 LISS IV sensor are in optical range of EMR.

Thermal Remote Sensing
The sensors, which operate in thermal range of electromagnetic spectrum record, the energy emitted from the earth features in the wavelength range of 3000 nm to 5000 nm and 8000 nm to 14000 nm. The previous range is related to high temperature phenomenon like forest fire, and later with the general earth features having lower temperatures. Hence thermal remote sensing is very useful for fire detection and thermal pollution. e.g., the last five bands of ASTER and band 6 of Landsat ETM+ operates in thermal range.

Microwave Remote Sensing
A microwave remote sensor records the backscattered microwaves in the wavelength range of 1 mm to 1 m of electromagnetic spectrum. Most of the microwave sensors are active sensors, having there own sources of energy, e.g, RADARSAT.
These sensors have edge over other type of sensors, as these are independent of weather and solar radiations.

Electromagnetic Spectrum

2007-04-06T23:52:00.000+05:30

Electromagnetic spectrum (EMS) represents the continuum of electromagnetic radiation (EMR) arranged on the basis of wavelengths or frequency.
Electromagnetic spectrum ranges from shorter wavelengths (gamma rays to x rays) to the longer wavelengths (microwave and radio waves).

Most common remote sensing systems operate in one or several of the visible, infrared and microwave portions of the electromagnetic spectrum. Within the infrared portion of the spectrum it should be noted that only thermal infrared energy is directly related to the sensation of heat; not the near and mid infrared
ones.

Before discussing about EMS with reference to remote sensing it is important to understand it fully. Different radiations which constitute the EMS are as follows:

Radio waves
These are the longest wavelength (lowest frequency) radiations of the EMS. The wavelength of radio waves is more than 100 cm. These passes through Earth's atmosphere easily. Radio signals are used in radios, televisions, aircrafts, ship etc. These are also emitted by stars.

Microwaves
Their wavelength ranges between 1mm & 1m. RADAR (Radio Detection And Ranging) is the most common device used in Microwave Remote Sensing. Other applications are in cooking food (microwave oven), in broadcasting transmissions etc.

Infrared Radiations
When we feel hot it is because of infrared (IR) radiations. For common understanding we can call them as 'Heat'. The wavelength of IR is longer than visible light and shorter than microwaves approximately ranges between 1micron to 100 microns. These are very useful radiations for remote sensing. Thermal Imaging Systems detect objects by recording their temperature (infrared emissions).

Visible Radiations
As their name itself suggests these are the EMRs which are visible to our eyes in different colours. These ranges between 700nm to 400nm. Most of the remote sensing systems and camera records images in this range.

Ultraviolet (UV) Radiations
These radiations have wavelength shorter violet colour of visible light and longer than X-rays. UV radiations can be divided into near UV (400–200nm), far UV (200–10) and extreme UV 1–31 nm.

X-rays
These are very short length electromagnetic radiations wavelength in the approximate range from 0.01 to 10 nanometers. In EMS these falls between UV radiations and Gamma-rays. Mostly used in medical sciences.

Gamma-rays
Gamma-rays are the electromagnetic radiations with shortest wavelength in the range of the range of 10^-11 m to 10^-14 m. Their very high energy can cause serious damage to living cells.

Spectral Reflectance

2007-04-06T23:37:00.000+05:30

The reflectance characteristics of earth surface features may be quantified by measuring the portion of incident energy that is reflected. This is measured as a function of wavelength (l) and is called spectral reflectance, rl.

rl = ER (l) /EI (l)

Where ER is reflected energy and EI is incident energy.
A graph of the spectral reflectance of an object as a function of wavelength is termed as spectral reflectance curve.

Spectral Reflectance of Vegetation
The spectral characteristics of vegetation vary with wavelength. A compound in leaves called chlorophyll strongly absorbs radiation in the red and blue wavelengths but reflect green wavelength. The internal structure of healthy leaves act as diffuse reflector of near-infrared wavelengths. Measuring and monitoring the infrared reflectance is one way that scientists determine how healthy particular vegetation may be.
Leaves appear greenest to us in summer and become red or yellow with decrease in chlorophyll content in autumn.

Spectral Reflectance of Water
Majority of the radiation incident upon water is not reflected but either is absorbed or transmitted. Longer visible wavelengths and near-infrared radiations are absorbed more by water than the visible wavelengths. Thus water looks blue or blue-green due to stronger reflectance at these shorter wavelengths and darker if viewed at red or near-infrared wavelengths. The factors that affect the variability in reflectance of a water body are depth of water, materials within water and surface roughness of water.

Spectral Reflectance of Soil
The majority of radiation on a surface is either reflected or absorbed and little is transmitted. The characteristics of soil that determine its reflectance properties are its moisture content, texture, structure iron-oxide content. The soil curve shows less peak and valley variations. The presence of moisture in soil decreases its reflectance.

By measuring the energy that is reflected by targets on earth’s surface over a variety of different wavelengths, a spectral signature for that object can be made. And by comparing the response pattern of different features we may be able to distinguish between them.

Satellite Sensor Resolutions

2007-04-06T23:11:00.000+05:30

Spatial resolution

Spatial resolution is the measure of smallest object that can be detected by a satellite sensor. It represents area covered by a pixel on the ground. Mostly, it is measured in meters.
For example, CARTOSAT-1 sensor has a spatial resolution of 2.5x2.5 m , IRS P6 LISS IV sensor has a spatial resolution of 5.6x5.6 m for its multispectral bands and LISS III has spatial resolution of 23.5x23.5 m in its first three bands. The smaller the spatial resolution, the greater the resolving power of the sensor system.
That's why one can detect even a car in the satellite image acquired by IKONOS (spatial resolution 1x1 m) but can see hardly even a village in a satellite image acquired by AVHRR (spatial resolution 1.1x1.1 km).

Spectral resolution
Spectral resolution refers to the specific wavelength intervals in the electromagnetic spectrum for which a satellite sensor can record the data. It can also be defined as the number and dimension of specific wavelength intervals in the electromagnetic spectrum to which a remote sensing instrument is sensitive. For example, band 1 of the Landsat TM sensor records energy between 0.45 and 0.52 µm in the visible part of the spectrum.The spectral channels containing wide intervals in the electromagnetic spectrum are referred to as coarse spectral resolution and narrow intervals are referred to as fine spectral resolution. For instance the SPOT panchromatic sensor is considered to have coarse spectral resolution because it records EMR between 0.51 and 0.73 µm. on the other hand; band 2 of the ASTER sensor has fine spectral resolution because it records EMR between 0.63 and 0.69 µm.

Radiometric resolution

Radiometric resolution defined as the sensitivity of a remote sensing detector to differentiate in signal strength as it records the radiant flux reflected or emitted from the terrain. It refers to the dynamic range, or number of possible data-file values in each band. This is referred to by the number of bits into which the recorded energy is divided. For instance, ASTER records data in 8-bit for its first nine bands, it means the data file values range from 0 to 255 for each pixel, while the radiometric resolution of LISS III is 7-bit, here the data file values for each pixel ranges from 0 to 128.

Temporal Resolution
The temporal resolution of a satellite system refers to how frequently it records imagery of a particular area. For example, CARTOSAT-1 can acquire images of the same area of the globe every 5 days, while LISS III doest it every 24 days.

The temporal resolution of a satellite sensor is very much helpful in change detection. For instance, agricultural crops have unique crop calendars in each geographic region. To measure specific agricultural variables it is necessary to acquire remotely sensed data at critical dates in the phenological cycle. Analysis of multiple-date imagery provides information on how the variables are changing through time. Multi-date satellite images are also used to detect change in forest cover.